Connect NetApp cluster IP using Putty
Using this blog i have tried to provide simple steps for installation and configuration .Your comment will provide me motivation for writing more.
NetApp MISC command line
Step by step installation & configuration NetApp 9.6 (ONTAP)
NetApp ONTAP System Manager (previously called as OnCommand System Manager) is single spectrum ONTAP tool to manage your storage across architectures.
Login to vCenter -> Select Cluster Name -> Right Click or Click on Action -> Select Deploy OVF Template
Select Local file -> click on choose files
Select NetApp .OVF file -> Open
Click Next
Give Virtual Machine Name -> Select Datacenter -> Next
From Compute resource select ESXI host -> Next
Click Next
Select Storage -> Select Virtual disk format thin provision -> NextSelect Network from the list
Click Finish to start deploy.
Right click and power ON
Type Yes for start configuration
Press enter without entering anything ->
Enter IP Address for Management interface ->
Press Enter to setup cluster or you can use GUI to setup
Type Create if you want to create new cluster or type join if you want to join existing one.
Type Yes if you want to create single node cluster
Enter admin password
Enter cluster name
Enter License key or press enter to skip it latter through GUI you can enter
Enter port Name e0c
Enter IP address for cluster management interface
Enter DNS Name and DNS IP -> Press enter
Enter Login ID and Password
Use Cluster IP to access console -> enter user name (admin) default account
VMWare Log insight 8.4 installation and configuration step by step
Requirement for Log insight
Download setup .OVF file
vCenter server & ESXI host
Global Administrator access on vCenter
Login to vCenter
Right click and deploy ovf template
Select local file-> choose and brose -> select log insight ovf file -> Next
Give Name and select folder where you want to provision log insight VM->
Expend cluster and select ESXI host on which you want to deploy it. Press next
Accept EULA -> Next
Select deployment size
Select datastore and virtual disk format
Select network and IP protocol (IPv4)
Give Hostname
Assign IP Address
Assign Subnet Mask
Assign Default Gateway
Assign DNS
Assign root credentials
Click finish for final deployment
Once deployment will complete
Power ON the VM.
Login with root
Password -> *****
Enter vRealize log insight IP address
Enter Username -: Default it will take admin
Email -: Enter email address
New password-: Enter password for Admin
Enter License Key or skip and assign key later
Enter email id for system notification and HTTP system post notification or click save and continue
Enter NTP servers details or select time Sync with ESXI host -> Save and continue
Enter SMTP Server details-:
Sender email ID-:
Click send test email-:
Save and continue
Configure SSL here or Skip and Save and continue
Click finish
Now all done for installation and configuration
Featured Post
HPE MSA 2040 configuration step by step
HPE MSA 2040 configuration Default IP range for HP SAN storage MSA 2040 is 10.0.0.1/2 You need to connect your laptop and storage with...
-
HPE MSA 2040 configuration Default IP range for HP SAN storage MSA 2040 is 10.0.0.1/2 You need to connect your laptop and storage with...
-
When you are powering on the VM and getting below error what do you need to do? Error code Module ‘Monitorloop’ power on failed Failed to ...
-
CRITICAL: This node is not healthy because the root volume is low on space (<10MB). The node can still serve data, but it cannot part...
-
Hi Friends, Here I am going to share some steps that will be required during ESXI host add in Vcenter 6.0. I have one Vcenter server wi...
-
Command to check vpxa, hostd service status | start stop the vpxa & hostd service Login to ESXi host using putty session Go to /etc/in...
-
X enApp 6.5 Installation and Configuration Steps
-
Different ways for certification authority backup https://blog.ahasayen.com/certification-authority-backup/ Upgrading / Migra...
-
Citrix PVS Reverse Imaging We do reverse imaging when you want to update vDisk, VMTool, OS or drivers. To update Citrix target devices it...
-
If you see EDGE node registration in pending state like below Run below command on NSX-T manager to get thumbprint get certificate api th...
-
You can upgrade using VUM, ISO or ESXCLI Here I am going to do this using ESXCLI I am using HPE custom ISO, you can download an offline bund...